1
/
of
2
BK3Z8501H Genuine Ford Water Pump To Suit Ford Ranger 2.2L 2460308
BK3Z8501H Genuine Ford Water Pump To Suit Ford Ranger 2.2L 2460308
Regular price
$268.00 AUD
Regular price
Sale price
$268.00 AUD
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
✓ Genuine Ford OEM Ford Part No. BK3Z-8501-H Australian Stock
This is a Genuine Ford water pump bearing Ford OEM part number BK3Z-8501-H (also referenced as BK3Z8501H). Engineered and validated by Ford for the 2.2L TDCi P4AT diesel engine fitted to PX-series Ford Rangers — correct sealing geometry, impeller flow rate, and long-term durability, no modifications required.
Part Specifications
| OEM Part Number | BK3Z-8501-H / BK3Z8501H |
| Brand | Genuine Ford |
| Part Type | Engine Water Pump (Coolant Pump) |
| Engine | 2.2L TDCi — Ford P4AT Diesel |
| Drive Type | Belt-driven (serpentine) |
| Condition | Brand New — OEM |
| Warranty | 12 months |
Vehicle Compatibility — Ford Ranger 2.2L TDCi
Suits Ford Ranger variants fitted with the 2.2L TDCi (P4AT) diesel engine only. Does not suit 3.2L (P5AT) or 2.0L (Lion) diesel variants.
| Model Series | Years | Engine | Drivetrain |
| Ford Ranger PX | 2011 – 2015 | 2.2L TDCi P4AT | 4x2 / 4x4 |
| Ford Ranger PX MkII | 2015 – 2018 | 2.2L TDCi P4AT | 4x2 / 4x4 |
| Ford Ranger PX MkIII | 2018 – 2022 | 2.2L TDCi P4AT | 4x2 / 4x4 |
⚠ 2.2L engines only. This pump is for the 2.2L TDCi (P4AT) engine exclusively. It does not fit the 3.2L five-cylinder (P5AT) or the 2.0L Bi-Turbo (Lion) engine. Check your engine cover sticker or contact us with your VIN if unsure.
Why Replace Your Ford Ranger Water Pump?
The water pump circulates coolant between the engine block and radiator to maintain safe operating temperatures. On the 2.2L TDCi, it is belt-driven and subject to wear over time. Common failure signs include:
- Coolant leak at the pump weep hole or gasket face
- Overheating or elevated temperature gauge readings
- Grinding or whining noise from the front of the engine
- Unexplained coolant loss with no visible external leak
Prompt replacement prevents secondary damage to the head gasket, radiator, and thermostat housing — all significantly more expensive repairs.
Why Choose a Genuine Ford Water Pump?
- Exact-fit engineering — manufactured to the same spec as the pump fitted at the assembly line, no sealing or clearance issues.
- Validated impeller design — OEM blade profile engineered for the specific coolant flow demands of the P4AT engine.
- Correct bearing pre-load — ensures quiet, long-life operation matched to Ford's belt tension specifications.
- No compatibility guesswork — part number BK3Z-8501-H is a direct OEM reference.
- 12-month warranty — backed by Ford on genuine parts.
Installation Notes
- Replace the serpentine/auxiliary belt at the same time — do not reuse a worn belt on a new pump.
- Flush and refill with Motorcraft Orange Coolant (or an approved Ford-spec equivalent) when replacing on this engine.
- Refer to Ford Workshop Manual for belt routing diagram and tension specification.
- Professional installation recommended.
Searching for BK3Z8501H in Australia? This part is also searched as BK3Z-8501-H water pump, Ford Ranger 2.2 water pump, PX Ranger coolant pump, Ford Ranger P4AT water pump, and Ford Ranger 2.2 TDCi water pump. Contact us with your VIN if you need fitment confirmation.
Share
